Different Types of Racking

There are many different types of pallet racking available on the market. The type of racking that would suit you will depend on the space available, how you want to utilise the racking and the type of goods you are storing.

In this article, we will differentiate the different types of racking to help you understand what type of racking you would benefit from.

Wide aisle racking

Wide aisle pallet racking is designed to store palletised loads and due to this, the system is made up of horizontal beams and upright frames which allows the necessary change of stock.

Wide Aisle Racking

The benefits:

Some benefits of wide aisle pallet racking include:

  • Unrestricted access to all pallets.
  • Gain access to pallets at any given time.
  • The beams which the system is made up of, are adjustable and therefore can be reconfigured and redesigned at any time.
  • This system offers a high throughput speed.
  • Unlike other types of racking, there is not any specialist equipment required.

Very narrow aisle racking

Very narrow aisle pallet racking is also known as VNA racking. It is often used in smaller warehouses due to the small aisles. On average, these systems tend to free approximately 45% of floor space. This allows you to store more goods in your warehouse, without the need to re-locate.

VNA Racking

However, these systems require specialist trucks in order to function.

The benefits:

The benefits of VNA racking include:

  • Offers up to 45% space utilisation.
  • Maximum aisle width of 5m.
  • This system offers a high throughput speed.

Liquid Floor Screed or Sand Cement Screed?

What is liquid screed?

Liquid screed is a mixture of sand and a binder system based on calcium sulphate. It was designed to provide a thin, smooth and level surface previous to the application of flooring. It can be used for both residential and commercial properties.

Floor Screed

What is sand and cement screed?

Sand and cement screed is made up of sharp sand, cement and water. All of the following screeds can be achieved with this type of screed: fully bonded, partially bonded and unbonded. Yet again, this can be used as a subfloor in domestic and commercial buildings.

What application?                                                                                                                                                        

For many, this is an easy question, as liquid floor screed has a variety of advantages over sand and cement screed. These can be found below.

Advantages of liquid floor screed over sand and cement screed

  • The labour of installation a liquid floor screed is a lot less than the typical sand and cement screed process. As well as this, the process is on average 10 times faster.
  • By installing a thicker screed (liquid flow screed) you will increase the thermal efficiency of your property/ premise. This is due to the fact that the screed depth can be significantly reduced.
  • As mentioned above, you can reduce the depth of the screed. There are many advantages of this alone including reduced weight and drying times.
  • Works in conjunction with underfloor heating better as it provides the user with the end result (heated flooring) quicker, due to reduced depth of screed.

Office Furniture Suppliers

If you are looking for office furniture suppliers, it’s important to do your research before making large purchases. Selecting the right furniture, mixing comfort and style is key to end up with an office layout that makes your employees enjoy their work environment and conveying the right message about your business brand identity.

There are many different options to suit each individual company – whether you want an open-plan shared working environment, individual booths, meeting room setups or casual social seating – most office furniture suppliers will have a comprehensive range of colours materials and sizes so you can be sure to plan the office design exactly as you want it.

Office Seating Solutions

Investing in quality, ergonomic office furniture is vital for the wellbeing and safety of your employees. From standing desks, posture correcting and more – each serves the purpose of aiding employees health and stopping any injuries which can occur from sitting uncomfortably for long periods.

Bespoke Office Furniture

If the furniture you have found whilst researching isn’t exactly what you are looking for, consider enquiring about bespoke office furniture which will be specially designed to specification. Having a manufactured custom item of furniture will ensure you get the aesthetic you desire to stand out and make an impression.

office furniture suppliers

Find VW Repairs Near You

Hire a Professional VW Repairs Expert

If you own a car, then you definitely know the importance of taking your car to a reliable car repair professional especially one that specialises in the make of your car, for example, a VW repairs expert. However, despite the knowledge that many people have, many are still hesitant to take their car to a professional car repair expert because they think that it is actually a waste of time and money. In this article, we are going to give you reasons why you should take your car to a professional VW repairs centre and specialist to examine and diagnose the problem with your vehicle.

VW Beetle

  1. They Are Well Skilled

One of the main reasons why you need to hire the services of a professional car repair expert is because they are well skilled and they can easily detect where the problem is. If you decide to repair your car by yourself, you will spend countless hours trying to figure out where the problem is and in some cases you may end up creating more problems. When you hire the services of a professional VW expert, he will quickly identify the problem and solve it once and for all.

  1. They are experienced

Professional car repair expert has been in this industry for long and is well conversant with car repair problems. No matter how complicated the problem may look, the expert will always find a solution because they have vast experience in this industry. If you hire their services, you will get nothing but the best car repair services.

  1. Specialist VW Repairs

Car repair experts have the right tools of work that enables them to repair cars fast and efficiently. They have gone through the right training meaning that they also know how to use that equipment. On the other hand, if you decide to repair your car by yourself, you might end up creating more problems, a factor that will force you to spend more. This is because you lack both the expertise and tools used in VW repair.

Alcester Storage

ALCESTER STORAGE

REASONS FOR STORAGE IN ALCESTER

Alcester is a market town in Warwickshire, located near to Stratford Upon Avon. For residents living within the area who need to store their belongings for various reasons including:

  • Not enough space in their household
  • Do not want to store assets in household
  • Storing belongings whilst moving to a new house
  • To avoid damage of possessions

There are also many other reasons, however, we have only named a few for example purposes.

Storage Units

How does storage work?

Firstly, you will need to choose what type of storage you require. This will depend on the items you wish to store and the quantity of them. There is a range of storage options available on the market which include:

  • Budget boxes
  • Storage units (available in different sizes)
  • Crate storage

Next, you will need to find a company which will be able to provide you with the storage option you require. All these storage options are available near to, or in the Alcester area. Once you have found the company you wish to use, contact them and arrange to view the storage room. We highly advise this, as this will allow you to see the security of the facilities, ask any questions you may have etc.

If after your viewing you want to go ahead with renting their storage facilities, you will need to sign a contract and arrange a date to move your belongings in on.

An Easy Guide to Gear Cutting

Gear Cutting

Gear cutting is any machining process for creating a gear. The most common gear-cutting processes include hobby, broaching, milling and grinding. These cutting operations may occur either after or instead of performing processes such as forging, extruding, investment casting or sand casting.

 

There Are Various Types of Gear Cutting Including:

  • Spurs
  • Bevel
  • Helical
  • Moulded
  • Racks
  • Worm and worm wheels
  • Internal gears

 Gear Cutting

The Process of Broaching:

For larger gears, a vertical broach is used. It consists of a vertical rail that carrier s single tooth cutter formed to create the tooth shape. Some machines will cut to a depth on the Y-axis and index the rotary table automatically.

 

The Process of Hobbing:

Hobbing is a method which a hob is used to cut teeth into a blank gear. The cutter and blank gear are rotated at the same time to allocate the profile of the hob onto the gear blank. The hob must make one revolution to create every tooth of the gear. This process of gear cutting is used very often for all sizes of production runs but works best for medium to high.

 

The Process of Milling and Grinding:

A spur may be cut or ground on a milling machine utilising a gear cutter and any indexing head or rotary table. The number of the gear cutter is determined by the tooth count of the gear to be cut. To machine a helical gear on a manual machine, a true indexing fixture must be used. Indexing fixtures can disengage the drive worm and be attached via an external gear train to the machine table’s handle.

After the gear cutting has taken place and it is finished by shaving, burnishing, grinding, honing or lapping.

Made to Measure Wardrobes

We answer your fitted wardrobe questions – no matter how stupid you think they are!

brown leather bag in shelf

When installing a made to measure wardrobe, there are a lot of questions you might have. Often people are afraid to ask these questions for fear of being deemed stupid by their wardrobe fitters. Well, we’ve compiled some of the most commonly asked made to measure wardrobe questions so you don’t have to embarrass yourself.

Is it easy to remove fitted wardrobes?

A lot of people who are looking to install a made to measure wardrobe want to make sure they can go back on it if they’re not a fan. We’re here to tell you that although it is possible to remove your fitted wardrobe, it isn’t the easiest process. Removing a fitted wardrobe will require a crowbar and you will need to patch up the wall afterwards. We would say think carefully about fitting a bespoke wardrobe because removing it will not be easy.

Do fitted wardrobes have backs?

You can choose to have a back on your made to measure wardrobe but a lot of the time, people do not have a back as it wastes space. Something to think about when choosing whether to have a back on your bespoke wardrobe is whether you will want to repaint the wall as this will be on display when the wardrobe is fitted and how adding a back might reduce your storage space.

Are fitted wardrobes old fashioned?

When we found out that people were asking this question, we were shocked. Although the made to measure wardrobe has been around for centuries, people still seem to think that it can’t be modern and fancy. Well, to answer this question, all we can say is no, fitted wardrobes are not old fashioned.

Can you put fitted wardrobes on an outside wall?

You can put a fitted wardrobe on an outside wall but heed this warning, if your house has a problem with mould, building your fitted wardrobe against an outside wall could just perpetuate the issue. So, we would recommend choosing the back wall of your made to measure wardrobe carefully.

Are sliding wardrobes good?

We can answer this question with one word: yes. So, what are you waiting for? Get fitting your made to measure wardrobe today.